Manta SPK5032 Manual De Usuario página 11

BLUETOOTH OPERATION
1. Turn on the unit and press the MODE button on unit or on the remote control to select the Bluetooth function.
The display shows „BLUE".
2. In Bluetooth mode, the symbol on display will start flashing, the system automatically enters search mode.
3. Activate the Bluetooth feature on the external device to be paired.
4. Initiate a search for devices. The device shows up as „SPK5032".
5. Select it and enter the password „0000" if required.
6. Press the PLAY button on the unit or the key on remote control, to start playing and the buttons NEXT and PREV,
or the keys and for the selection of songs.
FM RADIO FUNCTION
1. Turn on the unit and press repeatedly the MODE key on unit, or the MODE on remote control and select FM
function (the display will show the frequency).
2. Press the PLAY button on the unit or the key on remote control to activate the auto memory (the radio starts
an automatic search for available radio stations and saves them automatically). The station's number stored
depends on the radio signal in your area. During the search press PLAY button on the remote control to stop
searching.
3. Use the NEXT and PREV, or the keys and on the remote control to listen to the various radio stations saved in
memory.
4. To change to a preset station, use the number keys on the remote control. For example, to call up the station
number 12, first press 1 and then 2.
TROUBLE SHOOTING
If a problem occurs, follow the steps in the table below. If problems can't be solved, please contact your retailer.
Problem
1. The power cord is not connected
No sound
2. Faulty mains outlet
when power
3. No input source
is turned on.
4. Volume set to minimum
1. Master volume is set too high
Distorted
sound.
2. Damaged speaker
1. Microphone plug is not firmly inserted
2. The microphone is not switched on
No sound
from Karaoke.
3. Microphone volume set to the minimum
4. Battery in wireless mic is exhausted
No sound
1. Un supported file format
from MP3
2. Illegal copy
source.
3. USB/SD source not properly inserted
EN – SPK5032
Possible cause
9
Solution
1. Connect the power cord
2. Use an outlet that receives power
3. Connect an input source
4. Set the volume to an appropriate level
1. Reduce the volume
2. Check if the speaker is damaged
1. Insert the mic firmly into the socket
2. Switch the microphone on
3. Increase the microphone volume
4. Replace the batteries
1. Change into MP3 format
2. Insert the USB/SD source properly