Manta SPK5032 Manual De Usuario página 10

16. POWER SWITCH (POWER ON/OFF)
17. FM ANTENNA
18. CHARGING INPUT JACK (AC INPUT):
Charging led is on during charging
process
WIRELESS MICROPHONE
1. Open battery cover and insert a battery according to the + and – markings inside the compartment.
2. Turn on the microphone. If the power indicator doesn't flash nor lights up steadily check if the battery is charged
and if it has been inserted with the correct polarity.
3. Adjust the volume of the wireless microphone when you sing.
4. If the power indicator flashes when you switch on the wireless microphone, the battery is low and needs to be
replaced as soon as possible.
NOTES
1. The effective range of the wireless microphone is 15m. Do not use over that range.
2. Do not use two microphones working on the same frequency or crosstalk and interference will occur.
3. If you use more wireless microphones at the same me, they must be set to different frequencies and should be
kept away at least at 50m.
4. Don't put the device too close to a DVD/CD/VCD player as they have strong frequencies and might affect the
microphone.
BUILT-IN RECORDING FUNCTION
1. In Aux mode: Plug in a USB/SD card and press the record key to go to record function. The screen shows 00:01
to indicate that recording has started. If you connect the USB/SD card for the first me to the speaker, the system
will create a folder and the speaker will save and play the recorded file automatically in this folder.
2. In USB/SD play mode: Press the record key to go into recording mode. The current sound output will stop and
go to mute status. The screen shows "Recording". The recording will start when the screen displays 00:01. You
can use a microphone to record. If you connect the USB/SD card for the first me to the speaker, the system will
create a folder named VOICE
USB/SD OPERATION
Keep the speaker away from high temperatures, strong magnetic fields and any equipment that could generate
interference. If the speaker stops working, switch it off and on again, or unplug USB/SD/MMC card and re-plug it.
The speaker should be back to normal status.
Supported music formats: MP3, WMA
1. USB port: plug and play
2. SD/MMC slot: plug and play
3. Mode key: press to cycle through external AUX sound source/USB/SD card/ BLUETOOTH/FM 4.Play/pause: Press
to play, press to pause, press again to resume play.
4. Previous/Next: During play press once to go back to the beginning of the track or to the next track.
5. Repeat: During play press once to repeat the current song, press twice to repeat all songs.
EN – SPK5032
8