Amazon Basics B081244SRH Instrucciones De Instalación página 12

EN
» To avoid reconstruction install the product
in a proximity of properly grounded
socket outlet�
» Do not drill into any pipes or power lines
beneath the surface during mounting
holes preparation� Use voltage/metal
detector�
» The wall mounting bracket (H) is attached
to the product when delivered� Remove
the wall mounting bracket (H) before
starting to install�
For recessed installation B: The socket
outlet must be wired to an accessible 16 A
double pole switch in order to safely switch
the product on/off�
8. Operation
8.1 Switching on/off
1� Connect the power cord with plug (G) to
a suitable socket outlet�
2� Set the power switch (F) to 'I' (product
on)� The product beeps and the standby
indicator stays lit� The product is now in
standby mode�
3� Press the standby button (U) to switch on
the product�
NOTICE
The display goes off
approximately 7 seconds after no other
button is pressed�
4� To switch off the product, press the
standby button (U) again�
12
NOTICE
» Pressing any button on the remote
or touch controls once, displays the
current room temperature� To select any
function, press the same button twice�
» There may be a trace of odor during the
first few minutes of use, or after a period
of storage� This is normal and quickly
disappears�
» If the product is not in use for a long
period:
For wall installation A: Set the power
switch (F) to '0' and remove the plug (G)
from the socket outlet�
For recessed installation B: Set the wall
switch to off�
8.2 Setting day and time
1� Press the set date/time button (M), the
days indicator starts flashing�
2� Quickly press the increase button (N)
or decrease button (T) to select the
day, then press the set date/time (M)
to confirm� The hours indicator starts
flashing�
3� Quickly press the increase button (N)
or decrease button (T) to select the
hours, then press the set date/time (M)
to confirm� The minutes indicator starts
flashing�
4� Quickly press the increase button (N) or
decrease button (T) to select the minutes,
then press the set date/time (M) to
confirm� The day and time is now set�
8.3 Setting temperature
NOTICE
The product must be set to
low or high power for the heating function
to work�
» Press the temperature button (L)
repeatedly until the desired temperature
has been selected� Alternately, use
buttons (N) and (T) to scale up or down
the temperature range�