Descargar Imprimir esta página

Amazon Basics B081244SRH Instrucciones De Instalación página 16

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 74
EN
10.2
Maintenance
» Any other servicing than mentioned in
this manual should be performed by a
qualified service personnel�
11. Troubleshooting
Problem
The product does not
switch on�
The product switches
off automatically�
Flame on display panel
does not move�
Remote control does
not work�
Dim or poor visible
flame or crystals are
not glowing�
12. Disposal (for Europe only)
The Waste Electrical and Electronic Equipment (WEEE) laws aim to minimise the
impact of electrical and electronic goods on the environment and human health, by
increasing re-use and recycling and by reducing the amount of WEEE going to
landfill� The symbol on this product or its packaging signifies that this product must be
disposed separately from ordinary household wastes at its end of life� Be aware that this is
your responsibility to dispose of electronic equipment at recycling centres in order to conserve
natural resources� Each country should have its collection centres for electrical and electronic
equipment recycling� For information about your recycling drop off area, please contact your
related electrical and electronic equipment waste management authority, your local city office,
or your household waste disposal service�
16
Solution
» Check if the power plug is connected to the socket outlet�
Check if the socket outlet works�
» The product has overheated and the thermal safety device
has activated� Switch off the product and switch back on after
10 minutes�
» The product has overheated and the thermal safety device
has activated� Switch off the product and switch back on after
10 minutes�
» Flame motor faulty� Contact a qualified service personnel�
» Low battery� Change the battery�
» Standing too far from the product or an object is blocking the
path� Move closer or to a clearer path�
» The product has not been switched on� Switch on the
product from the on/off switch (F) or connect to the socket
outlet�
» The products LED lights are burnt out or wiring is loose�
Contact a qualified service personnel�
10.3
Plug fuse replacement (for UK only)
» Use a flat screwdriver to open the fuse
compartment cover�
» Remove the fuse and replace with the
same type (13 A, BS1362)� Refit the
cover�

Publicidad

loading

Este manual también es adecuado para:

B08124231hB08123t2qkB08298zdks, b0829bc1vyB08298w63y