Amazon Basics B081244SRH Instrucciones De Instalación página 13

» The temperature range is between 17 -
30 °C (62 - 86 °F)�
» When the room reaches the set
temperature, the heating function stops
automatically�
» If the product detects a drop in
temperature, the heating function
resumes automatically�
8.4 Changing power level
Press the power level button (R) to cycle
through the different settings� The display (V)
show the below symbols to indicate the
power level selected�
700 W
1300 W
» The approximate heat coverage area with
each power level:
Low Power - 8 - 10 m²
High Power - 10 - 20 m²
NOTICE
This product is fitted with a
temperature limiting control� If the product
reaches an unsafe internal temperature of
115 °C, the product automatically switches
off� To reset, unplug the product from the
socket outlet and wait 5 minutes before
plugging it back in and switching on�
8.5 Changing flame colour
» Press the flame button (P) repeatedly until
the desired colour is selected�
» The display (V) shows the code to
indicate the colour selected�
» When using F0 mode, press the flame
lock button (Q) at anytime to stop the
loop� Press the flame lock button (Q)
again to resume�
Low power
High power
F1 Orange
F2 Orange and green
F3 Green
F4 Green and blue
F5 Blue
F6 Blue and orange
F7 Blue, orange and green
F8 Blue and red
F9 Red
F0 Loop through all colours
8.6 Changing ember colour
» Press the ember button (J) repeatedly
until the desired colour is selected�
» The display (V) shows the code to
indicate the colour selected�
» When using C0 mode, press the ember
lock button (K) at anytime to stop the
loop� Press the ember lock button (K)
again to resume�
C1 Red
C2 Blue
C3 Green
C4 Rose red
C5 Orange
C6 White
C7 Purple
C8 Yellow
C9 Light blue
C0 Loop through all colours
8.7 Setting open window detection
function
The product monitors the temperature of the
room once it reaches the set temperature� If
the room temperature drops by 5°C or more
within 10 minutes, the product automatically
stops heating to conserve energy�
EN
13