Taurus I3021T Instrucciones De Uso página 27

Downloaded by: pd-oliana on 30-01-2023 15:52 CET
A(mm) B(mm)
760 50 Min.
Make sure that the induction hob is well ventilated and that neither the air inlet and outlets are
blocked.
Use the appropriate to cut the worktop as per the sizes shown in the diagram. Use Silicone or PTFE to seal the
edges of the cut surface and allow it to dry before fitting the hob.
Run the protective strip around the underside of the hob, making sure that the ends overlap. Do not fit the hob
into position without applying the protective foam.
C(mm) D
20 Min. Air Inlet
E
5mm Air Outlet