Taurus I3021T Instrucciones De Uso página 37

Downloaded by: pd-oliana on 30-01-2023 15:52 CET
The glass is becoming
scratched.
Certain cookware makes
popping and cracking
sounds
The induction hob hums
slightly when used at
high temperature.
Fan noise coming from
the induction hob.
Motor fan is making a
strange noise
The cookware does not
get hot and does not
appear on the display.
The induction hob or a
cooking area has
switched off
automatically. A sound
is emitted and an error
code is displayed
(usually alternating with
one or two digits on the
timer display).
Some buttons do not
work or the LED display
is not normal.
The cooking mode
indicator lights up but
heating does not start.
The cooking mode
indicator lights up but
heating does not start.
Heating stops suddenly
during use and the
display screen flashes
"u".
Heating stops suddenly
during use and the
Use of an unsuitable and/or
abrasive scouring pad.
Cookware with a rough base.
This may be due to the way the
cookware is made (layers of
different metals vibrating
differently).
This is due to the technology used
for induction cooking.
The induction hob's built-in cooling
fan has switched on to prevent the
electronics from overheating.
The fan is damaged
The cookware is not suitable for
induction cooking or either too
small for the hob or not centred.
Technical fault.
The display board is damaged.
Hob is too hot.
There is something wrong with the
fan.
The power board is damaged.
Wrong type of cookware.
Cookware diameter is too small.
The hob has overheated
Use cookware with a
smooth, flat base. Check the
cleaning and maintenance
section.
This is normal and not
considered a problem.
This is normal, the noise
should decrease or
disappear completely when
the temperature lowered.
This is normal and requires
no action. You can continue
cooking while the fan is
running. There is no need to
switch the appliance off.
Replace the motor fan.
Use induction cookware,
centre it on the cooking area
and make sure that the base
is suitable.
Make a note of the error and
switch off the power to the
induction hob. Contact a
qualified technician.
Replace the display board.
Ambient temperature may
be too high. The air inlet or
outlet could be blocked.
Make sure the fan works
properly; if not, replace the
fan.
Replace the power supply
board.
Use the correct cookware
(consult the instruction
manual).
Use the correct cookware
(consult the instruction
manual).