Kärcher VCN 3 - 1.012-910.0 Manual De Usuario página 13

Pet Accessories (Flexible
Hose, Upholstery Tool,
and Brush for pet)
1. Insert the round end of the Flexible
Hose into the port of the hand-held
vacuum cleaner. Note that the Flexible
Hose must be used in order to connect
the Upholstery Tool or the Brush for pet.
2. To use the Upholstery tool, insert its
oval shaped connector into the oval
shaped port on the Flexible Hose.
3. To use the Brush for pet, insert its oval
shaped connector into the oval shaped
port on the Flexible Hose.
Accessory Storage
Please install the mount on a clean
wall in advance (As shown in the "Wall
Mounting Storage Installation"
section). When you are done using
the accessories, they can be
conveniently stored onto the mount.
Operation
Charging the Machine
VCN 3
Please charge the vacuum cleaner
before the battery dies. If the voltage
is too low, the vacuum cleaner will
automatically shut off to protect the
battery.
1. Insert the adapter into the charging
port of the battery pack and connect it
to the AC power source to charge.
2. When the battery pack is inserted into
the hand-held vacuum cleaner to
charge, the hand-held vacuum
cleaner indicator light displays as
follows: when the red light is flashing,
it is charging; when the light turns
green, it is fully charged. The battery
pack can also be removed from the
English 13