Kärcher VCN 3 - 1.012-910.0 Manual De Usuario página 19

1. Press the release button for the dust
bin to open the bottom cover and
empty the dust.
Cleaning the filter system
1. Rotate the cyclone cone assembly
counter clockwise by hand to
separate it from the hand-held
vacuum cleaner for cleaning.
Release button for the
dust bin bottom cover
Cyclone cone assembly
NOTE: If the inner part of the assembly
gets stuck in the hand-held vacuum
cleaner or falls out during cleaning of
filter system, re-assemble by pushing
as shown in the figure.
Cleaning the HEPA
Filter Assembly
1. Rotate the HEPA filter decorative
cover by hand, counter clockwise as
shown in the figure in order to
remove the HEPA filter assembly
from the hand-held vacuum cleaner.
2. Rotate the HEPA air filter in the
direction shown in the figure in order
to separate the HEPA filter decorative
cover from the HEPA filter assembly.
NOTE: The HEPA filter can be washed
with water. After washing, It must be
fully dry before install and before using
the machine. (Frequent washing of the
HEPA filter will affect its filtering ability. It
is recommended to knock off the dust
after a regular cleaning, washing it with
water when it is dirty, and replacing it if
necessary).
English 19