Beurer medical FT 90 Instrucciones De Uso página 33

9. Measuring object temperature / room temperature
If you want to measure an object temperature with this thermometer, switch to object tem-
perature mode.
• With the thermometer switched on, briefly press the MODE/MEM button.
The device switches to the object temperature mode .
• Hold the thermometer 2 to 3 cm from the measuring point. Briefly press the SCAN button
and read the temperature in the display (fig. 9).
Measurements taken in object temperature mode are not stored.
If you want to use the thermometer to measure the room temperature you need to switch to
room temperature mode.
• With the thermometer switched on, briefly press the MODE/MEM button twice.
The device switches to the room temperature mode
• The room temperature is immediately displayed (fig. 10).
Measurements taken in room temperature mode are not stored.
.
33
Fig. 9
Fig. 10