Makita UH004G Manual De Instrucciones página 12

9. Attach the felt pad to the shear blades.
Fig.15
► 1 . Felt pad
10. Insert the protrusion on the shear blades to the
small hole on the rod, then align the position of the felt
pad with the holes on the tool, and then attach new
sleeves.
3
Fig.16
► 1 . Protrusion 2. Small hole 3. Sleeve 4. Felt pad
NOTICE:
Apply a small amount of grease to the
inner periphery of the hole of the rod.
NOTICE:
Be careful not to lose the sleeves.
11.
on the tool, and then tighten 2 bolts to fix the shear
1
blades.
Fig.17
► 1 . Bolt 2. Hole
12. Attach the bearing and the rod.
1
Fig.18
2
► 1 . Rod 2. Small hole 3. Bearing
NOTICE:
inner periphery of the small hole of the rod.
NOTICE:
shear blades fits in the small hole on the rod.
13. Attach the plate.
4
Fig.19
► 1 . Protrusion 2. Plate
NOTICE:
shear blades fits in the hole on the plate.
12 ENGLISH
Align the holes on the shear blades with the holes
1
2
1
2
Apply a small amount of grease to the
Make sure that the protrusion on the
1
Make sure that the protrusion on the
3
2