Makita UH004G Manual De Instrucciones página 2

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Blade length
Strokes per minute
Overall length
Rated voltage
Net weight
Model:
Blade length
Strokes per minute
Overall length
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
UH004G
600 mm (23-5/8")
2,000 / 3,600 / 5,000 /min
1,120 mm (44") 1,263 mm (49-3/4")
D.C. 36 V - 40 V max
4.3 - 4.9 kg
(9.5 - 10.8 lbs)
UH007G
750 mm (29-1/2")
2,000 / 3,000 / 4,000 /min
1,274 mm (50-1/4")
D.C. 36 V - 40 V max
4.6 - 5.2 kg
(10.1 - 11.5 lbs)
BL4020* / BL4025* / BL4040* / BL4050F
* : Recommended battery
DC40RA / DC40RB / DC40RC
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
Keep work area clean and well lit. Cluttered or
1.
dark areas invite accidents.
Do not operate power tools in explosive atmo-
2.
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
2 ENGLISH
UH005G
750 mm (29-1/2") 600 mm (23-5/8")
2,000 / 3,000 / 4,000 /min
1,123 mm (44-1/4")
4.5 - 5.1 kg 4.4 - 5.0 kg
(9.9 - 11.2 lbs) (9.7 - 11.0 lbs)
UH008G
600 mm (23-5/8") 750 mm (29-1/2")
2,000 / 3,600 / 5,000 /min
1,120 mm (44") 1,262 mm (49-3/4")
4.3 - 4.9 kg 4.4 - 5.0 kg
(9.5 - 10.8 lbs) (9.7 - 11.0 lbs)
PDC01 / PDC1200
UH006G
UH009G