Publicidad
Idiomas disponibles
Idiomas disponibles
5
Connect Wires (typical wiring)
1.
Match each labeled wire with the terminal having the
same letter.
REMOVE JUMPER
IF YOU HAVE BOTH
R AND RC WIRES
2.
Loosen the terminal screws using a screwdriver, insert
the wires, then tighten the screws.
3.
Push any excess wire back into the wall opening.
Labels don't match?
If a wire does not match any terminal designation, see next page.
O/B
Y
RC
R
5
RTH111
G
W
M32155A
69-2449ES—03
Publicidad
