Dc Analogical Output - HT Instruments HT78 Manual De Instrucciones

4.2.6. DC analogical output

The meter is designed with a DC voltage analogical output depending on the measured
current value and can be used for connection with external data loggers, digital
multimeters, etc.. (see Fig. 2) by using customized cables
Do not apply any vltage to the DCV output of metere durino the recording
operation
1. Select the desired measuring range and consider the herewith conversion values:
2. Connect the external logger to the DCV output of meter
3. Perform the current measurement (see § 4.3)
Fig. 2: Connection of meter with external logger
AC current range
300mA
3A
30A
300A
3000A
Table 1: Conversion values of DCV analogical output
CAUTION
DC output voltage range
1mV/1mA
1mV/0.01A
1mV/0.1A
1mV/1A
1mV/10A
EN - 8
HT78