Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: If fan or supply wires are different colors than indicated, have this unit installed by a qualified electrician.
WARNING
To avoid possible electrical shock, be sure electricity
s i
u t
n r
e
d
o
f f
t a
h t
e
m
a
(Figure 1).
NOTE: If you are not sure if the outlet box is
grounded, contact a licensed electrician for advice, as
it must be grounded for safe operation.
CAUTION: INCORRECT WIRE CONNECTION COULD
DAMAGE THIS RECEIVER.
1. Connect wires using connectors as shown in Figure 2.
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors. Do not operate fan until the blades are in
place. Noise and motor damage could result.
2. After connections have been made, turn leads
upward and carefully push leads into the outlet box,
with the white and green leads to one side of the
box and the black leads towards the other side.
The wires should be spread apart with the grounded
conductor and the equipment-grounding conductor
on one side of the outlet box and the ungrounded
conductor on the other side of the outlet box
(Figure 3).
3. Once the connection has been made, slide the receiver
into the hanger bracket, taking care not to pinch the wires.
The canopy comes up to cover the receiver and hanger
bracket. (Figure 4)
How to Wire Your Ceiling Fan
n i
u f
s
e
b
o
x
b
e
o f
e r
w
r i
n i
g
L
BLACK
N
WHITE
AC POWER
HARDWARE USED:
WIRE
CONNECTORS
GREEN-Ground Wire
From Ceiling
GREEN-Ground Wire
From Hanger Bracket
GREEN-Ground Wire
From Hanger Ball
GREEN / YELLOW
- Ground Wire From
Receiver
RED
GRAY
YELLOW
11
MAIN FUSE BOX
Figure 1
BLUE
BLACK
/ WHITE
GROUND
RED
GRAY
HANGER
YELLOW
YELLOW
BRACKET
/ GREEN
HANGER
BALL
BLACK
ANTENNA
Figure 2
x 8
BLACK & WHITE
Figure 3
Figure 4
DC MOTOR
BLACK
BLUE
/ WHITE
LIGHT KIT
LISTED
OUTLET
BOX
WHITE
BLACK
BLUE
Publicidad
