Cleaning And Maintenance Instructions - Bravetti KS700B Manual De Instrucciones

Operating Instructions
CAUTION: BLADE IS SHARP. HANDLE CAREFULLY.
6. The food tray should be placed on
countertop behind the unit, under
the blade. (Fig. 5) It is not necessary
to use the food tray, but it is
recommended.
FOOD TRAY
Fig. 5
7. The slicer can be used to slice
meats, bread, vegetables or cheese.
Put the food on the feeder and push
the food toward left using the food
press. Slice the food by sliding the
feeder forward. (Fig. 6)
Fig. 6
8. To avoid danger of injury always
slice the food with feeder and food
press. In case the shape or size of
the food does not allow the use of
the food press, the food press can
be removed. However, extra care
should be taken during slicing.
CAUTION: Do not use the slicer to
slice deep frozen food, bones, or you
may overload the slicer and damage
the blade. It may lead to personal
injury.
WARNING: Do not use the slicer the
slice jelly-like or wet food. The jelly or
excessive juice may spread into the
electrical components of the motor
assembly. For juicer meats, allow
them to chill and then slice. Failure to
do so may lead to fire and electric
shock, personal injury or death.
5

Cleaning and Maintenance Instructions

CAUTION:
• Blade is sharp. Handle carefully.
• Do not wash blade in dishwasher.
• Do not remove the lubricant of
the gears.
1. Always unplug the appliance and let
blade come to a full stop before
cleaning. Allow blade to cool before
removing.
2. Adjust thickness adjustment knob to
setting "—" before cleaning.
3. Once the blade has cooled, remove
the blade by inserting a coin in the
blade-locking screw and turning the
coin clockwise.
Once blade-locking screw has been
loosened completely, remove the
screw and push the blade from
behind with one hand. With the other
hand grip hole in center of blade.
(Fig. 7) Handle blade carefully when
removing, the edges are very
sharp.
BLADE
BLADE-
LOCKING
SCREW
Fig. 7
4. The blade-locking screw, feeder and
blade can be washed in hot soapy
water and then dried carefully. It is
not recommended to clean the blade
in the dishwasher because the sharp
edges could damage the dish-washer
rack, which could lead to rusting. Be
careful when cleaning the blade, as it
is extremely sharp. Do not touch the
sharp edge with hand.
5. The food press and food tray can be
put in the dishwasher for cleaning, but
it is recommended to hand wash
those items instead.
CAUTION
: Blade should not be left
to soak in water. Trying to locate blade
under water is potentially dangerous.
We suggest that you wash, rinse, dry
and immediately install the blade back
on the unit.
IMPORTANT NOTE:
The white, food-grade lubricant on
gears of the blade and motor assembly
is used to reduce friction and noise of
the gears. It should not be removed or
the life of the gears and cutting
performance will be reduced, and noise
of operation will also be increased.
In case of total removal of lubricant, a
thin film of food-grade, FDA approved
lubricant may be applied for
replacement of the original lubricant.
Never apply industrial-use or
automobile-use lubricant to the
gears as they may not be safe for
eating, and they may damage the
gears.
CAUTION:
After slicing raw meat, it is important to
clean blade as instructed in this manual
in order to avoid contamination and the
formation of bacteria. Failure to do so
could be a health hazard.
6. Clean outer surface of the main unit
using a damp cloth only. Keep
switches dry. Never immerse the
main unit in water.
6