Silk’n ND-FM03 Manual De Usuario página 7

light allergy medication.
• This product cannot be used on skin
diseases, wound ulceration, trauma and
post-operative wounds.
• Don't use the product for more than 15
minutes per treatment.
• Consult your physician if you are uncertain
whether or not you can use the product.
Charging
When the battery is low, the indicator light on the remote
control will flash and the product will automatically shut
down after flashing 10 times.
1. Connect the remote control
2. Plug the USB cable
3. Plug the other end of the USB cable
source. One to three indicator light(s) on the remote control
up. When charging is complete, all four indicator lights are lit.
Assembling
1. Connect the remote control
2. Fasten the elastic straps
Operation
1. Assemble the product as described in Chapter "Assembling".
2. Thoroughly clean and dry the neck and hands. Make sure they are free from
any dirt.
3. Sit or lie down and place the mask
straps to ensure the mask fits comfortably.
2
4. Turn on the device and select the desired mode. The product has two
modes. In the Manual Mode a preferred treatment can be selected: Red,
Blue, Yellow or Purple LED light therapy. One treatment takes 10 minutes.
In the Automatic Mode a preferred treatment cannot be selected. The
product is activated in the following order: Red (5 min.), Blue
(3 min.), Yellow (4 min.) and Purple (3 min.) LED light therapy.
to the mask
3
into the charging port of the remote control.
6
6
to the mask
3
to the mask
2
on your neck. Adjust the elastic
1
.
1
into a compatible USB power
.
1
.
1
EN
will light
3
6