JAROLIFT TDEP10/14 Instrucciones Originales página 36

TROUBLE SHOOTING / FAQ
The motor stops between both end
points in normal operation.
Possible cause:
• Thermal protection has responded.
Solution:
• Allow the motor to cool down for approx. 20
minutes.
The roller shutter stops when it goes up.
Possible cause:
• The roller shutter is iced or there is an obstruction
in the guide rail.
Solution:
• Remove the ice or obstruction. Move the roller
shutter in a downward direction to clear the trav-
el path.
36
WARNING!
All work on electrical equipment
carries the risk of fatal injury from
electric shock!
• Connecting the motor to the mains
and any work on electrical equip-
ment must only be carried out by an
approved electrical specialist in ac-
cordance with the connection plans
of the device.
• Carry out all installation and connec-
tion work in a voltage-free state.