Publicidad
Idiomas disponibles
Idiomas disponibles
eng
Translation of the Original Instruction Manual
Fig. 1 – 3
1 Screwed lid
2 Tank
3 Lever
4 Rocker switch
5 Pump unit
General power tool safety warnings
WARNING
WARNING
Read all safety warnings, instructions, illustrations and specifi cations provided
with this power tool. Failure to follow all instructions listed below m a y result in
HOHFWULFV K R FN¿ UHDQ G RUV H ULRX V LQ M X U \
Save all warnings and instructions for future reference.
The ter m " p ower tool " in the warnings refers to y o ur m a ins-operated (corded) power
tool or battery - operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the pres-
ence of fl ammable liquids, gases or dust. Power tools create sparks which
m a y ignite the dust or fum e s.
c) Keep children and bystanders away while operating a power tool. Distrac-
tions can cause y o u to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools. Unm o di-
¿ HGSOX J V DQ G PDWFK L Q J RX W OHWV Z L OOUHGX F HULV N RIHOHFWULFV K R FN
b) Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock
if y o ur body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplug-
ging the power tool. Keep cord away from heat, oil, sharp edges or moving
parts. Dam a ged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) protected supply. Use of an RCD reduces the risk of
electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when oper-
ating a power tool. Do not use a power tool while you are tired or under
the infl uence of drugs, alcohol or medication. A m o m e nt of inattention while
operating power tools m a y result in serious personal inj u ry .
b) Use personal protective equipment. Always wear eye protection. Protec-
tive equipm e nt such as a dust m a sk, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce personal inj u ries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the
tool. & D UU\ L Q J SRZ H UWRROV Z L WK \ R X U ¿ Q J HURQ WK H V Z L WFK RUHQ H UJLV L Q J SRZ H U
tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A
wrench or a key left attached to a rotating part of the power tool m a y result in
personal inj u ry .
e) Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unex p ected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and
clothing away from moving parts. Loose clothes, j e wellery or long hair can be
caught in m o ving parts.
g) If devices are provided for the connection of dust extraction and collec-
tion facilities, ensure these are connected and properly used. Use of dust
collection can reduce dust-related hazards.
h) Do not let familiarity gained from frequent use of tools allow you to become
complacent and ignore tool safety principles. A careless action can cause
severe inj u ry within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the j o b better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and m u st be repaired.
c) Disconnect the plug from the power source and/or remove the battery pack,
if detachable, from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safet y m e asures reduce
the risk of starting the power tool accidentally .
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power
tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools and accessories. Check for misalignment or binding
of moving parts, breakage of parts and any other condition that may affect
the power tool's operation. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly m a intained power tools.
f) Keep cutting tools sharp and clean. Properly m a intained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not allow for safe handling and control
of the tool in unex p ected situations.
5) Service
a) Have your power tool serviced by a qualifi ed repair person using only
identical replacement parts. This will ensure that the safety of the power tool
is m a intained.
Safety Instructions for Electric Decalcifi cation Pump
REMS Calc-Push
WARNING
WARNING
Read all safety warnings, instructions, illustrations and specifi cations provided
with this power tool. Failure to follow all instructions listed below m a y result in
HOHFWULFV K R FN¿ UHDQ G RUV H ULRX V LQ M X U \
Save all warnings and instructions for future reference.
"
Do not use REMS Calc-Push if it is damaged. There is a danger of accident.
"
Only connect the power tool of protection class I to a socket/extension lead
with a functioning PE conductor. There is a danger of electric shock.
"
Examine the hoses and seals for damage every time before using. Dam a ged
hoses can burst and cause inj u ry .
"
Only use original hoses, fi ttings and couplings for REMS Calc-Push. This
ensures that the safety of REMS Calc-Push is m a intained.
"
Install the REMS Calc-Push for operation horizontally in a dry place.
Penetration of water into the electrical device increases the risk of electric shock.
"
Do not close the screwed lid when pumping the decalcifi cation solution
into an installation or tank. Chem i cal reactions can release gases which put
the tank under pressure which could lead to inj u ry to persons and/or m a terial
dam a ges.
"
Monitor the decalcifi cation solution in the tank. Dilute the decalcifi cation
solution as soon as heavy reactions (gases) are produced Gases can escape
which cause inj u ry to persons and/or m a terial dam a ges.
"
Monitor to ensure that the pipe to be decalcifi ed allows a minimum passage
of the decalcifi cation solution. 'HFDOFL ¿ FDWLR Q L V Q R WSR V V L EOH Z L W K R X W SD V V D JH
"
Only use decalcifi ers approved for REMS Calc-Push, see 1. Use for the
intended purpose. REMS Calc-Push could be destro y e d if other acids are used.
"
Never mix different decalcifi ers.0L[ L Q J RIGLIIHUHQ W GHFDOFL¿ HUV FDQ OHDGWR
m a terial dam a ge and/or personal inj u ry .
"
Before fi lling in the decalcifi er, make sure that there is no decalcifi cation
solution residue in the tank and in the hoses. 0L[ L Q J RIGLIIHUHQ W GHFDOFL¿ FD
tion solutions can lead to m a terial dam a ge and/or personal inj u ry .
"
Only connect the REMS Calc-Push to an undamaged, tight system. Leaking
GHFDOFL¿ FDWLRQ V R OX W LRQ V FDQ OHDGWRPDWHULDOGDPDJHV DQ G RUSHUV R Q D OLQ M X U \
"
Neutralise the decalcifi cation solutions at the end of work and empty the
tank (2). Neutralise and clean the tank, the pump and the hoses. The fum e s
IURPW K H UHPDL Q L Q J GHFDOFL ¿ FDWLR Q V R O X W LR Q V FR X O GGDPDJHW K H GHFDOFL ¿ FDWLR Q S X P S
"
Do not aim any liquid jets at the REMS Calc-Push even to clean it. Penetra-
tion of water into the electrical device increases the risk of electric shock.
"
Do not suck up infl ammable or explosive liquids, for example petrol, oil,
alcohol or solvent, with REMS Calc-Push. The fum e s or liquids can ignite or
ex p lode.
"
Do not operate REMS Calc-Push in rooms where there is a risk of explosion.
The fum e s or liquids can ignite or ex p lode.
"
Protect REMS Calc-Push against frost. REMS Calc-Push could be dam a ged.
Em p ty the pum p body , the tank and the hoses from it.
● Never let REMS Calc-Push operate unattended. Switch it off during longer
work breaks, pull out the mains plug and remove all hoses/plugs if neces-
sary. Electrical devices can cause hazards which lead to m a terial dam a ge or
inj u ry when left unattended.
"
Do not operate REMS Calc-Push on a closed pipe system for a prolonged
period of time. REMS Calc-Push can be dam a ged by overheating.
"
Children and persons who, due to their physical, sensory or mental abilities
or lack of experience and knowledge are unable to operate REMS Calc-Push
safely may not use this unit without supervision or instruction by a respon-
sible person. Otherwise there is a risk of operating errors and inj u ries.
"
Only allow trained persons to use REMS Calc-Push. Apprentices m a y only
operate the electrical device when the y are older than 16, when this is necessar y
for their training and under the supervision of a trained operative.
"
Check the power cable of the REMS Calc-Push and extension leads regularly
for damage.+DYHWK H V H UHQ H Z H GE\ TX D OL¿ HGH[ S HUWV RUDQ DX W K R ULV H G5(06
custom e r service workshop in case of dam a ge.
"
Only use approved and appropriately marked extension leads with a suffi -
cient cable cross-section. Use ex t ension leads up to a length of 10 m with
cable cross-section 1.5 m m ² , from 10 – 30 m with cable cross-section 2.5 m m ² .
eng
7
Publicidad
