Dreame M12 Manual De Usuario página 13

How to Use
EN
Working Modes
The appliance is powered on in Auto mode by default, you can switch to Suction
mode as needed.
Auto Mode
While washing the floor, the appliance can adjust its suction
power according to different situations.
Suction Mode
If Suction mode is selected, the appliance will vacuum water only and the
brush roller will not be dampened. No water is coming out of the Clean
Water Tank.
Standard Mode (Handvac)
When the appliance converts to a handheld vacuum, it is powered on by
default in Standard mode.
Turbo Mode (Handvac)
Press the handvac mode switch to select the Turbo mode.
Using as a Floor Washer
1. Fill the Clean Water Tank: Press the Clean Water Tank release button to remove the
tank. Open the tank cover and fill the tank with clean water. Re-install the Clean Water
Tank and ensure it clicks into place.
Note:
•
For better cleaning performance, it is recommended to add 10ml detergent with the bottle cap into the full Clean
Water Tank, then shake gently and evenly for use.
•
Do not add any liquids other than the officially-approved cleaner.
9 9