Dreame M12 Manual De Usuario página 20

Care and Maintenance
Cleaning the Brush Assembly
* Clean as needed. Alternating use of the two provided brush rollers is recommended.
* Replacing the brush roller every 3 to 6 months is recommended.
1. First, press the brush roller cover
release buttons inwards on both sides
to remove the brush roller cover. Next,
press the brush roller release
button and the handle of the brush
roller will pop out. Pull the handle to
take out the brush roller.
3. Wipe the suction inlet with a dry cloth
or wet tissue. Do not rinse the brush
assembly with water.
2. Clean out any hair and debris tangled
on the brush roller with the provided
cleaning brush. Rinse the brush roller
with clean water and dry it completely.
1
2
4. After cleaning the brush roller, re-install
the brush roller and the brush roller cover.
You will hear a click to indicate that they
are installed in place.
1
2
EN
16 16