Makita DJV180 Manual De Instrucciones página 8

Keeping that situation, insert the saw blade into the
blade clamp as far as the two protrusions of the blade
can not be seen.
1
2
► 1 . Blade clamp 2. Jig saw blade 3. Protrusions
Return the tool opener to its original position.
After installing, always make sure that the blade is
securely held in place by trying to pull it out.
CAUTION:
• Do not open the tool opener excessively, or it
may cause tool damage.
To remove the blade, open the tool opener to the posi-
tion shown in the figure. Pull the saw blade out toward
the base.
1
► 1 . Jig saw blade
NOTE:
• Occasionally lubricate the roller.
3
8 ENGLISH
Hex wrench storage
1
► 1 . Base 2. Hex wrench
When not in use, store the hex wrench as shown in the
figure to keep it from being lost.
Cover plate
► 1 . Cover plate 2. Base
Use the cover plate when cutting decorative veneers,
plastics, etc. It protects sensitive or delicate surfaces
from damage. Fit it on the back of the tool base.
Anti-splintering device
► 1 . Base 2. Anti-splintering device
For splinter-free cuts, the anti-splintering device can be used. To
install the anti-splintering device, move the tool base all the way
forward and fit it from the back of tool base. When you use the
cover plate, install the anti-splintering device onto the cover plate.
2
1
2
1
2