Parkside PPMA 20-Li B2 Traduccion Del Manual De Instrucciones Originale página 19

General description
See the front fold-out page for
illustrations.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
- Appliance
- 1x terry cloth polishing pad
(100% cotton)
- 1x synthetic polishing pad
(100% polyester)
- Instruction manual
The battery and charger are not
included in delivery.
Functional description
The device is designed for waxing and
polishing or dewaxing of vehicle varnish.
Rotating the polishing disc helps achieve a
consistent mode of operation. The polish-
ing bonnets can be exchange for different
applications and detachable for cleaning.
Overview
1 Handle
2 ON / OFF switch
3 Polishing disc
4 Synthetic polishing pad
5 Terry cloth polishing pad
6 Release button
7 Rechargeable battery
8 Soft button
9 Charge level indicator
10 Speed regulator
Technical specifications
Cordless Polisher
Rated input voltage (U) ................ 20 V
Idling speed (n ) ...................0-3300 min
0
Working width ....................... Ø 250 mm
Protection category...........................IPX0
Weight ......................... approx. 1,28 kg
Sound pressure level
(L ) ....................... 74,2 dB; K
pA
Sound power level (L
measured .............. 85,2 dB; K
Vibration (a
) . 10,844/s
h,max
Temperature........................... max. 50°C
Charging ..............................4 - 40 °C
Operation ........................... -20 - 50°C
Storage ..................................0 - 45°C
For use with smart batteries
(Smart PAPS 204 A1/Smart PAPS 208 A1)
Operating frequency/
Frequency band .... 2400 - 2483.5 MHz
Max. transmission power .......≤ 20 dBm
Levels of noise and vibration were deter-
mined according to the norms and regula-
tions in the declaration of conformity.
- The specified total vibration values and
the stated noise emission values have
been measured according to a stand-
ardised test method and can be used to
compare one power tool with another.
- The specified total vibration values and
the stated specified noise emission val-
ues can also be used for a provisional
assessment of the load.
GB MT
..... PPMA 20-Li B2
= 3 dB
pA
)
WA
= 3 dB
WA
2 ; K= 1.5 m/s
-1
2
19