Publicidad
Idiomas disponibles
Idiomas disponibles
NOTES
• Analog audio cables are not supplied.
• Depending on the length or characteristics of the cable, there may be a difference in operating
distance.
• AUX1 and AUX2 does not support wireless Stereo and Group Play mode.
Connecting a mobile device via Bluetooth
When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of
cabling.
Precondition
• When connecting to a new BT device, make sure it is within 3.28 ft (1 m) distance.
• Disconnect from any Samsung TV before connecting to a mobile device.
• SUB speaker can't connect to BT when using Group Play or Stereo mode.
Bluetooth device
1. Press the
PAIRING button on the rear panel of sound tower.
(OR) Press and hold the
the "BT PAIRING" mode.
2. On your device, select "[AV] MX-ST9B Series" from the list that appears.
• After the device is connected. The light bar will all be lit cyan, and the Bluetooth light on the
rear panel is solid.
3. Play music files from the device connected via Bluetooth through the Sound Tower.
NOTES
If the device fails to connect
• Sound tower will beep if BT is disconnected.
• If a previously connected Sound Tower listing (e.g. "[AV] MX-ST9B Series") appears in the list, delete
it.
• Then repeat steps 1 and 2.
Bluetooth connection
• In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the
Sound Tower and the Bluetooth device exceeds 10 meters.
Blue Blinks
PAIRING button on the remote control for more than 5 seconds to enter
ENG - 17
OR
Pairing
(blinks)
Connected
Publicidad
