Kobalt SGY-AIR293 Manual Del Usuario página 10

ASSEMBLY INSTRUCTIONS
1. Attach a female plug onto the end of
the regulator (not included)
(See Figure 1).
DO NOT OVERTIGHTEN.
NOTE: Use threaded sealant tape (not
included) on the male threading of the
air pressure regulator (L).
2. Attach the female coupler on the
regulator (L) onto the spray gun inlet
by turning it clockwise to tighten.
Tighten with a 5/8 in. (16 mm) wrench.
DO NOT OVERTIGHTEN.
3. Attach the paint filter (K) into spray gun.
4. Attach the Paint Cup (H) to Air Paint
Sprayer. Tighten by turning clockwise,
for air tight connection.
DO NOT OVERTIGHTEN.
1
2
3
4
10
L
K
H
L