Kobalt SGY-AIR293 Manual Del Usuario página 2

TABLE OF CONTENTS
Compressor Requirements..........................................................................
Product Specifications..................................................................................
Safety Information........................................................................................
Package Contents........................................................................................
Preparation...................................................................................................
Spray Gun Set-up.........................................................................................
Assembly Instructions..................................................................................
Operating Instructions..................................................................................
Care and Maintenance.................................................................................
Troubleshooting............................................................................................
Warranty.......................................................................................................
Replacement Parts List................................................................................ 23
COMPRESSOR REQUIREMENTS
45
3.5
@
SCFM PSI
Tool Requirements
Exigences relatives aux outils
Requisitos de herramientas
IMPORTANT: To operate correctly, this tool requires airflow of at least 3.5 cubic
feet per minute (SCFM) at 45 pounds per square inch (PSI) at the tool. Check
the specifications of your air compressor to be sure that it can support both
the minimum SCFM and PSI required. The air hose length could affect how
much air pressure the tool is actually receiving. You may need to adjust the
air pressure higher on the air regulator to achieve the max working pressure
of 45 PSI.
2
2
3
3
8
9
9
10
11
14
18
22