VebaBox TUC6000 Manual Del Usuario página 10

submitted to fluctuating ambient temperatures in the range of -20;
+40°C.
CAUTION:
means, that goods should be preconditioned to the required temperature
before being put into the box.
CAUTION:
outlet of the unit. Goods should be stacked to allow at least a 10 cm gap directly
below the ceiling of the box. Do not place goods directly under the heat
exchanger – risk of dripping water.
The VebaBox TUC6000 is intended to be installed in the closed
superstructures of any type of cargo vans equipped with
•
Alternator power source of 12V / 150A DC minimum
•
Roof fan on van cargo space if the volume of VebaBox
container is higher than approximately 60% of total load
volume of van. This to ensure sufficient removing of
generated heat of the thermal unit.
4. Product assembly specifications
The product assembly consists of
a) Basic parts
1. VebaBox body
2. Thermal unit TUC6000 – monoblock
3. Power supply cable set
4. Mechanical fixing set
b) Accessories (optional)
1. Remote controller
2. Power packs
TUC6000-usm. Rev.00
© 2019 VebaBox B.V. User Manual VebaBox
The VebaBox is not constructed for cooling goods down. This
When loading the box, allow clearance around air intake and
+TUC6000
10