VebaBox TUC6000 Manual Del Usuario página 14

1. Main switch
2. Display
3. Evaporator
4. 110/230 Volt connection (optional)
5. 12 Volt connection
6. Cooling active indicator
7. Heating active indicator
8. Selecting buttons/temperature setting
9. SET button
10. Temperature display
11. Alarm signal
Turning on the unit:
To switch on the unit, use the power switch (1). Note, that if the
remote control is installed, the power switch on the thermal unit
needs to be always switched off. Use the power switch on remote
control in this case to turn on the thermal unit.
Note the unit will operate only when car engine is running, unless a
Powerpack has been installed or you use 110/230 VAC external
power supply.
Temperature setting:
During normal operation display shows the actual internal
temperature. To change the SET temperature:
TUC6000-usm. Rev.00
© 2019 VebaBox B.V. User Manual VebaBox
+TUC6000
14