Publicidad
Idiomas disponibles
Idiomas disponibles
•
Press the SET button, the set temperature value starts to
blink.
•
Use selecting buttons (arrows) to change the set
temperature.
•
Press the SET button again to confirm the temperature and
return to the current temperature display. (If no button is
pressed within 6 seconds, the current temperature is
automatically displayed).
Indicators:
The unit has one of 4 possible operational states:
•
Cooling active – indicated by symbol 6
•
Heating active – indicated by symbol 7
•
On temperature (in pre-set tolerance band) – neither symbol
6 or 7 is lit.
•
Delay of operation mode change – blinking of symbol 6 or 7
indicates that unit is changing its mode (cooling to heating or
vice versa) and is waiting for reset time delay (3 minutes by
default)
Alarm function is available on temperature controller. By default, this
will signa any deviation of more than 3°C from the set temperature.
Alarm sound can be muted by pressing any button (alarm will be still
signalized by the display blinking and symbol 11 lit).
Remote control
Thermal unit installation can contain remote dashboard control. If
installed, some specific conditions apply:
•
Remote display has priority in control of temperature. If
connected, the display on the thermal unit cannot be used
for setting of temperature and is not taking part in
temperature regulation.
TUC6000-usm. Rev.00
© 2019 VebaBox B.V. User Manual VebaBox
+TUC6000
15
Publicidad
