VebaBox TUF1005 Manual Del Usuario página 17

On/off switch in the
correct position.
The On/off switch in the
freezing correct position.
unit does
not switch
off.
The The doors are not
freezing closed properly.
unit is
working but There is a heat
do not source in the box.
freeze
properly. The air passages are
clogged or dirty.
The ambient
temperature is more
than 40°C. (104°F)
Is the temperature
set correctly?
The evaporator is
frozen.
Lack of refrigerant
gas or oil.
The Defective wire
freezing is connection / fan
working but defective.
fan is
stopped.
Display Display shows
error code. symbols Pr1 or Pr2.
The defrost Defrost interval is too
is not short.
TUF1005 and TUF1010-usm. rev.00
© 2020 VebaBox B.V. User Manual VebaBox+ TUF1005+TUF1010
Switch on/off button.
Hint: if you have a remote
control, the main switch
on the unit should be off.
Check if main switch is
turned off (also on remote
control).
Close the doors.
Remove the heat source.
Remove the obstruction,
dust or dirt.
Ensure an ambient
temperature < 40°C
(104°C) by a roof fan.
Set temperature.
Allow the evaporator to
defrost by turning on
manual defrost.
Call the VebaBox service.
Call the VebaBox service.
Defective temperature
sensor, call VebaBox
service.
Press the manual defrost
button for 2 seconds.
17