lubluelu A901+C710 Manual Del Usuario página 10

Installation and APP Connection
1. Remove the protective strips.
2. Align the side brush with the hole and tighten the screw.
R
3. Place the dustbin & charging base on a flat ground against the
wall away from the steps, then power on the charging base.
Note: Keep the base more than 1 meter away from both sides and more than 2 meters
away from the front.
The status indicator will light up when the base is powered on.
4. Roll the power cable into the winding bracket to prevent it
being dragged or displaced by the robot.
Winding bracket
Cable outlet
（on left or right）
08