Silvercrest GTGE 2000 A1 Instrucciones De Uso página 12

7) Plug the mains plug into an easily accessible mains socket.
8) For first use only: Turn the heat level control
ance heat up for approx. 15 minutes without food. The operating light
lights up to show that the appliance is heating up.
NOTE
The operating light 7 switches off as soon as the selected temperature
►
level has been reached.
The operating light 7 may switch on and off several times during this
►
process. This is not a malfunction of the appliance! It merely indicates
that the appliance is maintaining the temperature.
► The thermostat only operates from the beginning of the temperature
setting scale. Depending on the room temperature, heating up will start
at different positions on the scale.
► When the appliance is heated up for the first time, the protective layer
on the heating element 2 burns off. You may notice a small amount
of smoke and a slight smell. This is normal and dissipates after a short
time. Ensure that there is adequate ventilation. For example, open a
window.
The appliance is now ready for use.
Grilling
WARNING!
► To prevent the appliance from overheating, do not place any materials such
as aluminium foil, aluminium trays, plates or the like on the cooking grill 1.
There is a risk of fire!
► Never operate the appliance without sufficient water in the drip tray
otherwise, it may
overheat. There is a risk of fire! See section "Topping up the water".
► The surfaces of the appliance become very hot during use. During opera-
tion, touch the appliance only on the heat level control 6 or on the side
handles. There is a risk of burns!
1) Proceed as described in the section "Setting up" (steps 2–7).
2) Turn the heat level control 6 to MAX and let the appliance heat up for
approx. 5 minutes without food.
GTGE 2000 A1
6
to MAX and let the appli-
GB │ IE
7
3
;
│
9 ■