Set Up An Internet Access Point For Packet Data (Gprs); Advanced Internet Access Point Settings For Packet Data (Gprs) - Nokia E Serie Guia Del Usuario

Connectivity
Some or all access points may be preset for your device by
your service provider, and you may not be able to create, edit,
or remove them.
Set up an internet access point
for packet data (GPRS)
1. Select Menu Tools
>
Access points.
2. Select Options New access point
>
access point, or select an existing access point from the
list and then Options
the access point as a basis for the new one.
3. Define the following settings.
Connection name
•
connection.
Data bearer — Select
•
Access point name
•
point. The name is usually provided by your service
provider.
User name — Enter your user name if required by the
•
service provider. User names are often case-sensitive
and provided by your service provider.
Prompt password
•
password each time you log into a server or
the password in your device memory and automate
the login.
102
Settings Connection
> >
to create a new
Duplicate access point
>
— Enter a descriptive name for the
Packet data.
— Enter the name for the access
— Select Yes to enter your
Password
•
service provider. The password is often case-sensitive
and provided by the service provider.
Authentication
•
password always encrypted, or
password encrypted when possible.
Homepage
•
want to display as the home page when you use this
access point.
>
4. After defining the settings, select
settings
the settings and exit.
to use
Advanced internet access point
settings for packet data (GPRS)
Select Menu
points.
After setting up a basic internet access point for packet data
(GPRS), select
following advanced settings:
Network type
•
protocol type. The internet protocol defines how data is
transferred to and from your device.
No to save Phone IP address
•
Select Automatic
IP address. This setting is shown only if you select
Network type
— Enter your password if required by the
— Select Secure
— Enter the web address of the page you
to define the advanced settings or
Tools Settings
> > >
Options Advanced settings, and define the
>
— Select IPv4 or IPv6
— Enter the IP address of your device.
to have the network provide the device
> IPv4.
© 2007 Nokia. All rights reserved.
to send your
Normal to send your
Options Advanced
>
Back to save
Connection Access
>
as the internet