Publicidad
Idiomas disponibles
Idiomas disponibles
Modes 3 and 4 are intended for hunting wild boar. The indication (sound or vibration)
is triggered if the dog moves within the imaginary circle of the S-radius, which is
given by the sensitivity setting (see the sensitivity setting chapter) for the time t,
which is given by setting the time (time setting chapter).
Setting the sensitivity – :
Setting the sensitivity for modes 0, 1, 2, 5, 6 serves for more precise recognition
between moving/stationary dog.
S-1: Lower sensitivity – the dog is considered stationary even when it is moving al
little bit.
S-9: High sensitivity – the dog is considered stationary only if it is absolutely still.
Setting of sensitivity in mode 3, 4 serves to set the radius of the virtual circle.
If the dog moves within this circle for certain time (t), the receiver will conclude the
dog has found a wild boar.
Sensitivity - S
Radius - r [m]
The set radius of the virtual circle is approximate only – we need to respect the
imprecision of the GPS position location.
Setting of the time – :
Setting of time for modes 0, 1, 2, 5, 6 – the indication will begin if the dog remains
in a given condition (moving/still) for a set time period. A delay in the status
indication also depends from the set interval of location updates (see chapter
6.4 on page 10).
interval of
updates [s]
time t
1
indication
7
delay [s]
The times in the table are estimates only.
Setting of time for modes 3, 4 – the indication will start, if the dog remains in the
virtual circle for time period t.
Setting the volume of audio indications – :
Audio indication can be adjusted in 3 levels. The set volume will affect the other
functions too - FENCE.
1
2
5
10
3
2
3
4
10
13
16
time t
Indication delay [s]
3
4
5
20
30
35
40
6
1
2
3
4
10
16
22
28
1
2
3
30
60
90
6
7
8
9
45
50
60
9
1
2
3
11
20
29
38
4
120
4
17
Publicidad
