Publicidad
Idiomas disponibles
Idiomas disponibles
6. Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire
or temperature above 130 °C (265 °F) may
cause explosion.
7. Follow all charging instructions and do not
charge the battery pack or tool outside
the temperature range specified in the
instructions. Charging improperly or at
temperatures outside the specified range
may damage the battery and increase the
risk of fire.
The purpose of safety symbols is to attract your attention to possible dangers. The safety
symbols and the explanations with them deserve your careful attention and understanding. The
symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings
they give are no substitutes for proper accident prevention measures.
WARNING:
!
including all safety alert symbols such as "DANGER," "WARNING," and "CAUTION"
before using this tool. Failure to following all instructions listed below may result in
electric shock, fire, and/or serious personal injury.
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION. May be
!
used in conjunction with other symbols or pictographs.
DANGER:
!
WARNING:
!
CAUTION:
!
NOTICE: (Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
SAVE THESE INSTRUCTIONS!
SAFETY INSTRUCTIONS
Be sure to read and understand all safety instructions in this manual,
SYMBOL MEANING
Indicates an imminently hazardous situation, which, if not avoided, will
result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could
result in minor or moderate injury.
Storage Recommendations
1. The best storage place is one that is cool
and dry, away from direct sunlight and
excessive heat or cold.
2. For long storage, it is recommended to
store a fully charged battery pack in a coo
dry place out of the charger for optimal
results.
Note : The battery pack will need to be
recharged before use.
SERVICE
Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the
power tool is maintained.
3
Publicidad
