Publicidad
Idiomas disponibles
Idiomas disponibles
SPECIFIC SAFETY RULES FOR
CORDLESS JIG SAW
1. To reduce the risk of electric shock or
damage to the chargers and batteries,
use only with the m7 battery packs and
chargers listed below:
Battery pack
DB-1840
DB-1850
DB-1850P
2. Hold the power tool by its insulated gripping
surfaces when performing an operation
where the cutting tool may contact hidden
wiring or its own cord. Contact with a "live"
wire will make exposed metal parts of the
tool "live" and shock the operator.
3. Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding the work by hand
or against your body leaves it unstable and
may lead to loss of control.
4. When using the jigsaw, use safety
equipment including safety goggles or
shield, ear protection, dust mask and
protective clothing including safety gloves.
5. Ensure that the lighting is adequate.
6. Do not use the saw unless the guards are
in place.
7. Keep the shoe plate on the workpiece.
8. Do not put pressure on the saw, such that
it slows the motor down. Allow the saw
blade to cut without pressure. You will get
better results and you will be taking better
care of your tool.
9. Keep the area free of tripping hazards.
10. Do not let anyone under 18 years operate
this jigsaw.
11. Only use blades in good condition.
SPECIFIC SAFETY RULES
Charger
DC-18A
12. Before cutting, check that there is
sufficient clearance for the blade under
the workpiece.
13. Only use blades in good condition.
14. Do not touch the blade after operation, it
will be very hot.
15. Keep your hands away from under the
workpiece.
16. Never use your hands to remove sawdust,
chips or waste close to the blade.
17. Rags, cloths, cord, string and the like
should never be left around the work
area.
18. Avoid cutting nails. Inspect the workpiece
and remove all nails and other foreign
objects before beginning sawing.
19. Never reach over the blade to remove
waste or off cuts.
20. Do not attempt to free a jammed blade
before first switching off the machine.
21. If you are interrupted when operating the
saw, complete the process and switch off
before looking up.
22. Periodically check that all nuts, bolts and
other fixings are properly tightened.
23. Do not store materials or equipment
above a machine in such a way that they
could fall into it.
24. Do not secure the jigsaw upside down in
a vice or work bench and use it as a saw
bench. This can lead to serious injury.
5
Publicidad
