Profi Cook PC-ICM 1268 Manual De Instrucciones página 11

CAUTION:
• Be sure to observe the waiting time of 2 hours when
using the appliance for the first time or after transport,
so that the refrigerant can settle. Otherwise, the refrig-
eration compressor would be damaged.
• Do not use a metal spoon when removing the ice
cream or yoghurt so as not to scratch the coating in
the container.
• Use gloves to protect your hands when removing the
container after making ice cream. There is a risk of burns
from the cold!
If the Refrigerant Circuit is Damaged
• Avoid open flames and sources of ignition at all costs.
• Pull the appliance's mains plug out of the socket.
• Ventilate the room in which the appliance is located.
Notes for Use
Location
• Place the appliance on a stable, horizontal and level
surface. Keep a distance of at least 15 cm from walls or
objects.
• Do not place the appliance on or in the immediate vicinity
of heat sources such as stoves, radiators, etc.
Electrical Connection
Before you plug the mains plug into the socket, check that
the mains voltage you intend to use matches that of the
appliance. You will find the information on the type plate.
Indications on the Display
Standby mode
(the symbol flashes)
Ice preparation
(stirring tool and cooling active)
Cooling active
Stirring tool active
Yoghurt preparation (heating active)
Post-cooling function active
Functions of the Buttons
• Use the POWER button to switch the appliance on and
off.
• Use the MENU button to select a programme.
PC-ICM1268_IM
• You can start the selected programme with the
START / PAUSE button.
• You can interrupt the activated programme with the
START / PAUSE button. When preparing ice, the com-
pressor continues to cool for 1 minute. Press the button
again to continue the programme.
• If you want to cancel a programme, press the POWER
button. The appliance switches off.
• If the or programme has been cancelled with the
POWER button, maintain at least 5 minutes before
restarting the appliance. This ensures that the pressure
in the refrigerant circuit can relax.
Preparation Time
• The preparation time of ice cream or yoghurt varies. It
depends on the following factors:
- the recipe,
- the temperature of the mixture,
- the ambient temperature,
- the desired consistency.
• Do not leave the appliance unattended during operation.
• Ice Preparation:
• When preparing ice cream, constantly check the
consistency of the mixture.
• The ice cream mixture should not be too thin or too
thick.
• Yoghurt Preparation:
• The preparation time depends on your individual
preferences.
Check the yoghurt after a few hours. If necessary,
reduce or increase the pre-set time. To do this, first
press the START / PAUSE button and then change the
time with the rotary control. Then restart the appliance.
• The consistency of the yoghurt becomes firmer when
it is placed in the refrigerator after preparation.
Protective Functions During Ice Cream Preparation
• If the stirring tool stops during operation because the ice
cream mass has become too solid, the motor will stall.
1. Switch off the appliance immediately. Pull the mains
plug out of the socket.
2. Remove the ice cream.
• You can start another operation immediately after
preparing ice cream. For protection, the compressor only
switches on after about 3 minutes.
• When preparing several portions of ice cream in suc-
cession, overheating protection may be activated. The
compressor does not switch on. Allow the appliance to
cool down for about 30 minutes before using it again.
11
12.06.23