Silk’n ND-FM05 Manual De Usuario página 8

4. Turn on the device and select the desired mode. The product has two
EN
modes. In the Manual Mode a preferred treatment can be selected: Red,
Blue, Yellow or Purple LED light therapy. One treatment takes 10 minutes.
In the Automatic Mode a preferred treatment cannot be selected. The
product is activated in the following order: Red (5 min.), Blue
(3 min.), Yellow (4 min.) and Purple (3 min.) LED light therapy.
Manual Mode:
• Take the remote control
on the device. It will enter into the Manual Mode with Red LED light
therapy by default.
• Short press the power button
therapy.
• Short press the power button
light therapy.
• Short press the power button
LED light therapy.
• Short press the power button
addition, if you want to turn off the product during your treatment, you
can also long press the power button
Automatic Mode:
• Take the remote control
turn on the device. It will enter into the Manual Mode with Red LED
light therapy by default.
• Short press the Auto/Manual button
Mode.
Don't use the product for more than 15 minutes
per treatment.
5. Apply a cream after treatment.
Treatment programme
If you are using the product for the first time, please stick to the following
schedule:
• First week: use once every 3 days, max. 10 minutes at a time.
• Second week: use once every 2 days, max. 10 minutes at a time.
7
and short press the power button
3
again to switch to the Blue LED light
4
a third time to switch to the Yellow LED
4
a fourth time to switch to the Purple
4
a fifth time to turn off the product. In
4
.
4
and short press the power button
3
to switch to the Automatic
5
to turn
4
to
4