Publicidad
Idiomas disponibles
Idiomas disponibles
How to use
Vapor Care
Press this button to sterilise the laundry. It is ideal for ANTI-ALERGEN and CHILDREN'S CLOTHES program-
mes. Do not place your hands on the door or open the detergent drawer when activating this function..
Extra Rinse
Press the button to add an extra rinse level to the selected programme. The different extra rinse levels will
appear on the display.
Delayed start
Press to set the end time of the wash cycle (Delayed End) in one hour increments up to a maximum of
24h. After selecting the desired wash programme but before pressing the START/PAUSE button, press the
PROGRAMMED START button until the desired time is displayed.
Note: The cycle time is included in the programmed start setting.
Here is an example of a cycle time of 1 hour: 30 minutes and a programmed end time of 8 hours. 8 h is
displayed and counts down (approximately 6 h: 30 min) until the wash cycle starts (at 1 h: 30 min) then
the cycle time 1: 30 is displayed and starts. Total time: approx. 8 hours.
To cancel the programmed start: turn the programme selector to reset the wash cycle. Once activated,
a countdown will appear on the display.
Important notes:
•
In some wash programmes this function may not be available.
•
The end time of the wash cycle may be different from the time shown on the display depending on
the water supply pressure, drainage, type of laundry, water temperature and other conditions.
One Touch
Press to set the ONE TOUCH function in the current wash cycle. In this function, the wash cycle can inte-
lligently detect the weight of the laundry and combine different wash times and temperatures for the
most efficient wash possible. Once this function is activated, "AUTO" will be shown on the display and
then the programme will start.
You can activate this function in three different ways:
• When the washer is OFF, press and hold the ONE TOUCH button for at least 3 seconds, the washer will
run the smart wash cycle directly, with the ONE TOUCH indicator light illuminated.
• When the machine is ON, press and hold the ONE TOUCH button for at least 3 seconds, the machine will
run the ONE TOUCH wash cycle directly, with the ONE TOUCH indicator light on.
• When the machine is ON, briefly press the ONE TOUCH button and its indicator light will turn on, then
press the START/PAUSE button and the machine will run the ONE TOUCH wash cycle.
Start/Pause
Long press the button to start a wash cycle. Once the cycle has started, if you want to pause the current
cycle, press and hold the button again.
If the DOOR LOCK indicator is not illuminated, the door may be open, you can add or remove laundry. To
start the wash cycle from the point where it was interrupted, press the button again.
40
English
infiniton.es
Publicidad
