Publicidad
Idiomas disponibles
Idiomas disponibles
How to use
Energy saving
•
The most energy-efficient programmes are generally those that run at lower temperatures and for
longer durations.
•
Loading the household washing machine to the capacity indicated by the manufacturer for each
programme will help to save energy and water.
•
Programme duration, energy consumption and water consumption levels may vary depending on
the weight and type of wash load, additional functions selected, water and ambient temperature.
•
It is recommended to use liquid detergent for low temperature washing programmes. The amount
of detergent used may vary depending on the amount of laundry and the degree of soiling. Please
follow the detergent manufacturers' recommendations on the amount of detergent to be used.
•
Noise and remaining moisture level depend on the spin speed. The higher the spin speed, the higher
the noise and the lower the remaining moisture level.
•
You can access the product database where the model information is stored by scanning the QR
code on the energy label.
Important information
Use detergents, softeners and other additives suitable for automatic washing machines only. Excessive
foam has occurred and the automatic foam absorption system has been activated due to excessive
use of detergent.
activated due to excessive use of detergent.
We recommend regular cleaning of the washing machine every 2 months. For periodical cleaning
For periodical cleaning, use the Drum Cleaning programme. If your machine does not have the
Drum Cleaning programme, use Cotton-90 programme. When necessary, use descalers made specifi-
cally for washing machines.
Never try to open the door when the machine is running. You can open the door of your machine 2 mi-
nutes after the completion of a washing operation. *
Never try to open the door when the washer is running. The door will open right after the washing cycle is
finished. *
Installation and repair procedures should always be carried out by an authorized service agent to avoid
possible hazards. The manufacturer will not be held responsible for any damage
The manufacturer shall not be liable for any damage caused as a result of a procedure performed by
an unauthorised person.
(*) Specifications may vary depending on the machine purchased.
43
English
infiniton.es
Publicidad
