Infiniton WM-82B Manual De Usuario página 42

Cleaning & Maintenance
Cleaning the inlet water filter
Note: If you notice a decrease in water flow, this is a sign that the filter needs to be cleaned.
1. Close the tap and remove the water supply hose from the tap.
2. Clean the filter with a brush.
3. Unscrew the water supply hose from the back of the machine. Remove the filter with long nose pliers.
4. Use a brush to clean the filter.
5. Reinstall the filter in the water inlet and reconnect the water supply hose.
6. Clean the inlet filter every 3 months to ensure normal operation of the appliance.
1
Cleaning the drain pump filter
Note: Make sure that the machine has finished the washing cycle and is empty. Turn off the machine
and unplug it before cleaning the drain pump filter.
Important! Be careful with hot water. Let the water cool down. Risk of scalding.
1. Open the bottom cover, located on the front of the washing machine.
2. Open the filter by turning it anticlockwise.
3. Carefully remove all foreign bodies inside.
4. Reinsert the filter by turning clockwise and close the lid.
1
Note: Clean the filter periodically every 3 months to ensure normal operation of the appliance.
Important! When the appliance is in use and depending on the selected programme, there may be hot
water in the pump.
Never remove the pump cover during a washing cycle. always wait until the appliance has finished the
cycle and is empty. When replacing the lid, make sure that it is tightened securely.
2
2
45
3
3
English
4
4
infiniton.es