3.12.13 Display of the internal software version
Hold the HOLD key pressed and bring the rotary switch
from the OFF position to the A position .
The unit beeps, the software version is displayed in the form
UX.XX for 2 seconds, then all the segments of the display
are shown as long as the HOLD key is pressed.
3.12.14 Showing of display segments
See § 03.12.13. It is usually possible for any key-switch
combination not described previously.
4. GENERAL SPECIFICATIONS
4.1 Dimensions and weight
70 x 193 x 37 mm
4.2 Clamp Tightening Capacity
≤ 26 mm
4.3 Power supply
a standard 9 V alkaline battery (type CEI 6LF22, 6LR61 or
NEDA 1604). To change it, see §7.1.
Average battery charge life: 60 h or 20,000 x 10 s
measurements
Battery charge indicator
Flashing: charge life < 1 h
Fixed: Change battery
Automatic OFF after 10 minutes with no action on the switch
or the keys (reactivation by switching from the OFF position
of the switch or by actuating any key)
4.4 Environmental parameters
Temperature - Humidity
90
80
70
60
50
40
30
20
10
0
-50
-40
-30
Altitude
- Operation: ≤ 2000 m
- Storage ≤ 12,000 m
-20
-10
0
10
Temperature in °C
Reference range
Storage range (without battery)
260 g
:
+
-
20
30
40
50
Operating range
41
60
70
80
90