Features And Controls; Know Your Pressure Washer - Craftsman 580.752110 Instrucciones De Uso

KNOW YOUR PRESSURE WASHER

Read the Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C D
,
E
A - Recoil Starter — Used for starting the engine manually.
B - Oil Fill/Dipstick — Check, add and drain engine oil here.
C - Pump — Develops high pressure.
D - Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
E - High Pressure Hose — Connect one end to water pump
and the other end to spray gun.
F - Adjustable Nozzle Extension — Attach to spray gun to
use adjustable nozzle. Adjust for high or low pressure;
narrow or fan spray.
G - Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
H - Warning/Operating Instructions Tag — Identifies
hazards and proper procedure to start/stop pressure
washer.
J - Fuel Tank — Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.

FEATURES AND CONTROLS

Items Not Shown:
Air Filter — Protects engine by filtering dust and debris out
of intake air.
Data Tag (near rear of base plate) — Provides model and
serial number of pressure washer. Please have these readily
available if calling for assistance.
High Pressure Outlet — Connection for high pressure hose.
Primer Bulb — Prepares a cold engine for starting.
Safety Goggles — Always use the enclosed safety goggles
when running your pressure washer.
Throttle Lever — Sets engine in starting mode for recoil
starter and stops a running engine.
Water Inlet — Connection for garden hose.
6
J
H
G
F