SOLAC AB2700 Instrucciones De Uso página 11

16. Telescopic metal tube
17. Brush for floors, carpets, ...
18. Special brush for wood and parquet flooring. (Only mod. AB 2720-AB2750).
19. Tip for vacuuming grooves, corners, ...
20. Upholstery brush
21. Carry handle
22. Dust-bag holder
23. Brush button
USER INSTRUCTIONS
• Check that the dust-bag container (3) and filters (7 and 9) are fitted correctly.
See the following section (Changing the dust bag, the motor protection filter
and the air outlet filter).
• A safety catch prevents the vacuum cleaner from closing if the dust bag-con-
tainer is not fitted.
• To open the bag compartment (2), press the dust bag-container opening latch
(1) and lift the cover (fig. 1).
• To close the compartment (2), lower its cover and press down on the opening
space with your hand (1), until you hear a click (fig. 2).
• Fit the flexible hose (14), placing the end in the connection opening (5), until
you hear a click.
• Before using the vacuum cleaner, prepare the heads for the surface to be
cleaned. They snap together with a gentle turn. The heads can be placed di-
rectly on the flexible tube (14) or, for out-of-reach surfaces, fit the telescopic
metallic tube (16).
• The suction brush (17) on these models can be used for all types of floors, car-
pets, and rugs. This brush is retractable depending on the surface to be vacu-
umed. To change the cleaning position of the brush, press the brush button (23)
with your foot (fig. 3). We recommend cleaning hard floors, wood and parquet
with the fibre brush activated, and cleaning carpets and rugs with the fibre brush
hidden.
• The special brush for PARQUET (18), with natural bristles, can be used for
wooden and parquet flooring.
• This model also incorporates a suction head for narrow spaces, grooves and
corners (19), and a head for upholstered surfaces (20). These accessories fit di-
rectly onto the flexible pipe (14) or onto the telescopic metal pipe (16).
• The vacuum cleaner can now be plugged in: To do so, pull out the cord and
press the button (10) to switch it on.
• Use the regulator (12) to adjust the suction power.
• Suction power can also be adjusted by opening or closing the device on the
handle (13).
• When finished, switch the appliance off by pressing button (10). Unplug it and
press button (11) to wind up the cord. Hold the cord plug in your hand to prevent
it from banging against the vacuum cleaner housing.
10
Aspirador AB2750-2700-2720 10 13/11/07, 18:21:17