Maintaining And Cleaning; Troubleshooting By Yourself - SEVERIN 7115 Manual De Instrucciones

Maintaining and cleaning

Cleaning or replacing the filter
4 Maintaining and cleaning
– Before changing the filter or filter cleaning, switch off the appliance and disconnect the plug from
the outlet.
– The motor filter can be washed, however it cannot be washed in the dishwasher or washing ma-
chine. Rinse the motor filter out thoroughly under running water (illustrated Quick Start Guide,
page 3). Let the motor filter dry for approx. 24 hours at room temperature after cleaning.
Only insert the motor filter when it is completely dry.
– First knock out the exhaust filter for cleaning, then brush with a soft brush (illustrated Quick
Start Guide, page 4).
For the filter cleaning, see also illustrated Quick Start Guide.
Cleaning
– Before cleaning, switch off the appliance and disconnect the plug from the outlet.
– The housing and power cable may not be handled with liquids or immersed in liquids for reasons
of electrical safety. Rub housing with a slightly damp cloth and then dry.
– For cleaning, do not use any sharp or scouring cleansers or hard brushes.

Troubleshooting by yourself

So that as few problems as possible arise, it is important to empty the dust container regularly and
take this opportunity to check the filters and clean them if they are dirty.
The contact data is in the appendix to this instruction manual or on our home page.
If you still have problems with the appliance, first visit us on the Internet at
www.severin.com/go/to/8362 under "FAQs" and try to fix the problem by
yourself.
Use this QR code to reach our home page directly.
If this does not help, contact our customer service.
13