Renfert Basic eco Guia De Inicio Rapido página 10

Select blasting pressure
⇒ Take the handpiece out of the holder of the relevant sandblasting tank (see color markings).
⇒ Activate the foot switch.
en
⇒ Set the sandblasting pressure at the pressure regulator (6) (see „Technical Data").
♦ The amount of pressure will be shown on the pressure gauge (7).
Cleaning / Maintenance
Sandblasting tank
Check the sandblasting tank or tank lid regularly, at least 1 x a year, by visually inspecting for
damage or changes to the material (e.g., cracks ...).
If in doubt, replace!
The sandblasting tank and tank lid are subject to a natural aging process depending on ambient
conditions and must be replaced as standard after every 15 years of operation.
Note the year of manufacture on the round stamp engraved on the sandblasting tank and in the
tank lid; Our customer service team are happy to advise you.
To clean:
DO NOT use solvent-based cleaning agents or disinfectants.
Solvents and tensides can result in microcracking in the plastic (danger of explosion!).
⇒ Only clean the sandblasting tank and tank lid by rubbing with a dry cloth.
Cleaning the housing
⇒ DO NOT use solvent-containing cleaning agents or disinfectants.
⇒ DO NOT use aggressive or abrasive cleaning agents.
⇒ Wipe the housing and aluminium frame gently with a slightly damp cloth, do not apply pressure.
Cleaning the Interior
► DO NOT use solvent-containing cleaning agents or disinfectants. (use e.g. soapy water).
⇒ Remove bottom grate and the blast protection mat.
⇒ Vacuum the blasting chamber.
⇒ Check the unit regularly for damage underneath the bottom grate / blast protection mat.
⇒ Exchange the damaged bottom grate / blast protection mat.
Condensation
⇒ Inspect the water separator (21).
⇒ Drain any water off through the valve (20).
Spare parts
Only use accessories and spare parts that have been supplied or approved by Renfert GmbH.
Using other accessories or other spare parts can lead to inadvertent accidents and damage.
You can find components subject to wear and the spare parts on the spare part list in the internet at
www.renfert.com/p918.
Obligations regarding information
► Information on REACH and SVHC is available on our website www.renfert.com, in the Support area.
Disposal instructions
Within the European Union units with this symbol should not therefore be disposed of in unsorted
domestic waste.
For more information regarding proper disposal please apply at your local authorities.
We reserve the right to make technical change
- 4 -