Hella Gutmann MT-HV Manual De Instrucciones página 55

Hella Gutmann
7. High-Voltage Measurement
This section describes how to perform a high-voltage measurement. The following pictures illustrate the exact proceed-
ing.
7.1. Connecting the high-voltage test lead to the MT-HV
DANGER
Danger to life due to electric voltage
It is a precondition for performing high-voltage measurements that the user has knowledge of automotive
technology and is therefore aware of the sources of danger and risks in the workshop and on motor vehi-
cles. An additional country-specific qualification is mandatory.
CAUTION!
Danger of destruction of the MT-HV and/or the automotive electronics
Only use approved test prods and high-voltage test leads.
Do not remove the protective cap from the test prods during high-voltage measurements.
Prior to every application, check the test prods and high-voltage test leads for damage (visual inspection).
MT-HV
High-Voltage Measurement | 7.
55