Benavent F2PBM143W Manual De Instrucciones página 24

9. Install the lower hinge on the left side of the cabinet.
10. Remove the screw that secures the door stop from the
bottom right of the refrigerator compartment door, then
remove the door stop and install to the bottom left side.
11. Install the refrigerator compartment door.
12. Move the door bushing from the top right side of the
freezer door to the top left side of the door. And move the
left hole cover to the right side.
13. Remove the center hinge screw hole plug on the left
side of the cabinet, then install in the screw holes on the
right side of the cabinet.
14. Install the center hinge to the left side with the two
screws you removed previously.
15. Remove the screw that secures the door stop from the
bottom right of the freezer compartment door, then
remove the door stop and install to the bottom left side.
Note: Ensure the rubber gaskets are making a good seal with the cabinet all the way around the doors before tightening
the hinge screws.
16. Install the Freezer compartment door.
17. Move the door bushing from the top right side of the
freezer door to the top left side of the door. And move the
left hole cover to the right side.
18. Remove the hole cover from the top left side of the
cabinet and secures the cover on the top right side of the
cabinet.
19. Secure the upper hinge to the top left side of the
cabinet with the three screws you removed previously.
Before you tighten the upper hinge screws, make sure
that the top of the door is level with the cabinet and that
the rubber gasket makes a good seal.
20. Install the hinge cover over the hinge on the top left
side of the cabinet.
12