Futurelight PHS-200 Manual Del Usuario página 46

Press [ENTER] for 3 seconds to enter the main menu (display flashing).
Press [UP] to select "TIME".
- Fixture running time
With this function you can display the running time of the device.
Select "MATI" by pressing [UP] button.
Press [ENTER], the display shows"XXXX", "X" stands for the number of hours.
Press [ENTER] or [EXIT/DN] to exit.
- Lamp running time
With this function you can display the running time of the lamp.
Select "LATI" by pressing [UP] button.
Press [ENTER], the display shows"XXXX", "X" stands for the number of hours.
Press [ENTER] or [EXIT/DN] to exit.
- Clear lamp time
With this function you can clear the running time of the lamp. Please clear the lamp time every time you
replace the lamp.
Select "CLLT" by pressing [UP] button.
Press [ENTER], the display shows"ON" or "OFF".
Press [UP] to select "ON" if you wish to enable this function or "OFF" if you don't.
Press [ENTER] to confirm.
Press [EXIT/DN] in order to return to the main menu.
Select the channel no. you would like to edit by pressing [UP].
Press [ENTER] to enter editing for the selected channel , the fixture reacts to your settings. The display
shows the DMX value of the edited channel. Such as " 11XX", it stands for channel 11 of the current scene,
the DMX value is XX , XX is a hexadecimal number value "01-FF".
Adjust the desired DMX value by pressing [UP] or [EXIT/DN].
Press [ENTER] in order to edit other channels of this scene.
- Main menu 5
Press [ENTER] for 3 seconds to enter the main menu
(display flashing).
Press [UP] to select "EDIT".
- Define the number of steps in Run
With this function you can define the number of steps in the
Program Run.
Select "STEP" by pressing [UP] button.
Press [ENTER], the display shows"S-XX", "X" stands for
the total amount of steps you want to save, so you can call
up to 48 scenes in "RUN". For example if the "XX" is 05, it
means that "RUN" will run the first 5 scenes you saved in
"EDIT".
Press [ENTER] to save and exit.
- Editing the channels of the individual scenes
With this function you can edit the program to be called up
in Run.
a) Editing via the Control Board
Select "SC01" by pressing [UP] button.
Press [ENTER], the display shows "SCXX", "X" stands for
the scene no. to be edited.
Change the scene no. by pressing [UP].
Press [ENTER], the display shows "C-XX", "XX" stands
for the channel no. Such as "C-01", it means you are
editing channel 1 of the selected scene.
46/95 00025926.DOC, Version 1.5