Powr-Flite PF1886 Instrucciones De Operación página 5

CAUTION: Fully assemble the unit before using.
Hardware Package: The package contains two nuts and bolts, one screw and one spring
Step 1: Assemble Lower Handle
Attach lower handle over socket, align holes and fasten with bolt and internally threaded nut provided in hardware package
Step 2: Attach Upper Handle
Place upper handle over lower handle align holes and fasten with bolt and internally threaded nut included In hardware package
Step 3: Install Line Cord Support and Bag Hook Attach spring bag hook to rear upper handle tube. Insert fitting end into
rectangular hole. Align holes and fasten with screw provided in hardware package.
Step 4: Bag Assembly (Model PF1886EC only) Open zipper of outer bag cover Attach spring around dust bag connector located inside
paper bag cover ( See Fig 2 ) Slide paper bag tube over connector and roll spring up to hold bag. Be sure zipper printing on
paper aligns - up with zipper on paper bag cover.
Step 5: Install Outer Bag to Upright Vacuum
Hold bag and lower bag support with both hands with the lower bag support tab pointing down. Put the tab into the adapter
retainer and push the lower bag support toward the vacuum. Turn the bag latch around the latch pin. ( See Fig 3 )
All manuals and user guides at all-guides.com
HOW TO ASSEMBLE
– 5 –